Emergency? Call 999

For general enquiries

Contact Us

Latest Incidents

11th February, 2024 - 12.57pm: We were called to the M4 westbound between J15 and J16 for a car well ...Read more

10th February, 2024 - 2.23pm: We were called to assist two people who were stuck about 10m above the...Read more

8th February, 2024 - 1.59pm: A large quantity of food grade golden syrup was spilled on the road. T...Read more

6th February, 2024 - 09.16: Fire crews from Stratton St Margaret and Swindon were called to a dome...Read more

Safe storage of hay

Dry hay stacks in rural wooden barn interior on the farm

A lot of people don’t realise that wet hay is more likely to lead to spontaneous combustion than dry hay. If hay is put into a barn or stack when it has more than about 22% moisture, not only does the hay lose forage quality, but it has an increased risk of catching fire.

High moisture hay stacks can have chemical reactions that build heat. Hay insulates, so the larger the haystack, the less cooling there is to offset the heat.

When the internal temperature of hay rises above 130 degrees Fahrenheit (55 degrees C), a chemical reaction begins to produce flammable gas – and this can ignite if the temperature goes high enough.

Hay fires generally occur within six weeks of baling. Heating occurs in all hay above 15% moisture, but generally it peaks at 125-130 degrees F, within three to seven days, with minimal risk of combustion or forage quality losses.

Temperature within a stack then declines to safe levels in the next 15 to 60 days, depending on bale and stack density, ambient temperature and humidity, and rainfall absorbed by the hay.

To avoid hay fires, small, rectangular bales should not exceed 18 to 22% moisture, and large round or rectangular bales should not exceed 16 to 18% moisture for safe storage.

In addition, you should check your hay regularly. If you detect a slight caramel odour or a distinct musty smell, chances are your hay is heating. At this point, checking the moisture is too late, and you’ll need to keep monitoring the hay’s temperature.

What do you do if you suspect that your hay is heating?

A simple probe inserted into the haystack can accurately monitor temperature. You can make a probe from a 10-foot piece of pipe or electrical tubing. Sharpen the pipe or screw a pointed dowel to one end, then drill several 1/4-inch diameter holes in the tube just above the dowel. Drive the probe into the hay stack and lower a thermometer on a string into the probe. The thermometer should be left for 10 minutes in several areas of the stack to ensure an accurate reading.

Watch for the following temperatures:

Reduce your risk of barn fires

 

results found.

Name:
Post Holders:
Grade: